Xiaomi Redmi S2 (Redmi Y2) Firmware File Download
|Xiaomi Redmi S2 (Redmi Y2)|
|Display Technology||Display||IPS LCD capacitive touchscreen|
|Screen Resolution||720×1440 pixels|
|Screen Size||5.99” inches|
|Operating System||Android Oreo|
|Dust and Waterproof||–|
|CPU/GPU||Processor Chipset||Snapdragon 625|
|Expandable Up to||256|
|Connectivity||Dual SIM(Nano-SIM), Bluetooth, 4G voLTE, GPS,|
|Dimensions||160.7 x 77.3 x 8.1 mm|
How To Install The Flash File Full Guide:-
Charge your tool: Before you continue, you’re really helpful to make certain that your tool is no less than 50% charged.
PC: To set up the flash report, you wish to have a PC or Laptop.
Backup: The very very first thing to be aware of is taking the tool backup. You would possibly no longer have the ability to take the backup of telephone knowledge, on the other hand, when you have inserted a reminiscence card on your tool, take away it no less than to put it aside.
Xiaomi Flash Tool: Download and Install the Xiaomi Mi Flash device in your PC (Fastboot Method)
Install Latest Driver: Install the Latest Xiaomi USB Drivers. [For All Android USB Drivers]
Download: Download the under given required information in your PC.
- Download the MIUI xxx Fastboot ROM on your Xiaomi gadgets
- Now flip your tool off utterly. Press the Volume– key and the Power button concurrently to go into Fastboot mode.
- Once you have got entered fastboot mode, you are going to see the Mi Bunny Fastboot mode image.
- Now attach the tool to the Windows PC/pc by the use of a micro USB cable.
- You wish to double click on at the downloaded ROM report to extract it.
- Open the extracted ROM folder, and duplicate its trail at the pc.
- To set up Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash device in your pc.
- Now click on at the installer report in your pc and proceed the set up. (Ignore the safety caution) and choose run to proceed the set up.
- After set up is done, open MiFlash.exe and paste the cope with bar from the ROM report folder trail copied within the sixth step. (You too can browse the folder through tapping the Select button).
- If you have got pasted the Address code, Now Click at the first button (rotated out in yellow) to Refresh, and MiFlash must robotically acknowledge the tool. Then click on the second one button (rotated out in purple) to flash the ROM report to the tool.
- Your flashing procedure has began, Now Wait till the development bar within MiFlash turns totally inexperienced, which means that the ROM has been effectively put in. Then your tool must robotically boot to the brand new model.
- First of all, To Install by the use of Recovery, you wish to have to obtain Recovery ROM
- Now attach your Xiaomi tool to PC and duplicate the downloaded report to the downloaded_rom folder on your Internal Storage.
- Launch ‘Updater‘ app on your tool.
- Click at the three dots (‘…’) on the top-right nook, and choose the ‘make a selection replace bundle‘.
now press OK to begin the flashing procedure.
- Done. Your tool will reboot after the flashing is completed.
Check Our Other publish On- Xiaomi Redmi Note 5 Official Stock Flash Download
Check Our Other publish On- Xiaomi Redmi Note 5 Pro Official Stock Flash Download
Check Our Other publish On- Xiaomi Redmi Y1 Official Stock Firmware File Download
Firmware File Download Link Here(Recovery ROM)
Firmware File Download Link Here(Fastboot ROM)
•Warning: The Firmware report is just for the Xiaomi Redmi S2 (Redmi Y2), Don’t do that report on every other tool, It might brick or harm your tool we can no longer be accountable for that.
•Important Suggestion: If your drawback no longer solved through given resolution you’ll write in feedback we can take a look at best possible to mend once we will.