Xiaomi Redmi Note 4 Official Stock Firmware Download
|Xiaomi Redmi Note 4|
|Display Technology||Display||IPS LCD capacitive touchscreen|
|Screen Resolution||1080×1920 pixels|
|Screen Size||5.5” inches|
|Operating System||Android 7.0|
|Dust and Waterproof||–|
|CPU/GPU||Processor Chipset||Snapdragon 625|
|Expandable Up to||256GB|
|Connectivity||Hybrid Dual SIM Nano-SIM, Bluetooth, 4G voLTE, GPS,|
|Dimensions||151 x 76 x 8.5 mm|
How To Install The Flash File Full Guide:-
Charge your tool: Before you continue, you might be really helpful to make certain that your tool is no less than 50% charged.
PC: To set up the flash document, you wish to have a PC or Laptop.
Backup: The very very first thing to be aware of is taking the tool backup. You may no longer have the ability to take the backup of telephone knowledge, on the other hand, in case you have inserted a reminiscence card to your tool, take away it no less than to put it aside.
Xiaomi Flash Tool: Download and Install the Xiaomi Mi Flash instrument for your PC (Fastboot Method)
Install Latest Driver: Install the Latest Xiaomi USB Drivers. [For All Android USB Drivers]
Download: Download the under given required recordsdata for your PC.
- Download the MIUI xxx Fastboot ROM in your Xiaomi units
- Now flip your tool off totally. Press the Volume– key and the Power button concurrently to go into Fastboot mode.
- Once you’ve gotten entered fastboot mode, you’ll see the Mi Bunny Fastboot mode image.
- Now attach the tool to the Windows PC/computer by the use of a micro USB cable.
- You wish to double click on at the downloaded ROM document to extract it.
- Open the extracted ROM folder, and replica its trail at the laptop.
- To set up Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash instrument for your laptop.
- Now click on at the installer document for your laptop and proceed the set up. (Ignore the protection caution) and make a choice run to proceed the set up.
- After set up is finished, open MiFlash.exe and paste the cope with bar from the ROM document folder trail copied within the sixth step. (You too can browse the folder through tapping the Select button).
- If you’ve gotten pasted the Address code, Now Click at the first button (turned around out in yellow) to Refresh, and MiFlash will have to robotically acknowledge the tool. Then click on the second one button (turned around out in pink) to flash the ROM document to the tool.
- Your flashing procedure has began, Now Wait till the development bar within MiFlash turns absolutely inexperienced, because of this the ROM has been effectively put in. Then your tool will have to robotically boot to the brand new model.
- First of all, To Install by the use of Recovery, you wish to have to obtain Recovery ROM
- Now attach your Xiaomi tool to PC and replica the downloaded document to the downloaded_rom folder to your Internal Storage.
- Launch ‘Updater‘ app to your tool.
- Click at the three dots (‘…’) on the top-right nook, and make a choice the ‘make a selection replace bundle‘.
now press OK to start out the flashing procedure.
- Done. Your tool will reboot after the flashing is finished.
Check Our Other publish On- Xiaomi Redmi 4 Prime Stock Firmware Download
Check Our Other publish On- Xiaomi Mi 6 Plus Official Stock Firmware File Download
Check Our Other publish On- Xiaomi Mi Mix Official Stock Firmware File Download
Firmware File Download | Link Here |
•Warning: The Firmware document is just for the Xiaomi Redmi Note 4 , Don’t do that document on every other tool, It might brick or injury your tool we will be able to no longer be liable for that.
•Important Suggestion: If your downside no longer solved through given answer you’ll write in feedback we will be able to check out best possible to mend once we will be able to.