Xiaomi Redmi 4A Official Stock Firmware Download
|Xiaomi Redmi 4A|
|Display Technology||Display||IPS LCD capacitive touchscreen|
|Screen Resolution||720×1280 pixels|
|Screen Size||5.0” inches|
|Operating System||Android 6.0.1|
|Dust and Waterproof||–|
|CPU/GPU||Processor Chipset||Snapdragon 425|
|Expandable Up to||256GB|
|Connectivity||Hybrid Dual SIM Nano-SIM, Bluetooth, 4G voLTE, GPS,|
|Dimensions||139.9 x 70.4 x 8.5 mm|
How To Install The Flash File Full Guide:-
Charge your tool: Before you continue, you’re really useful to be sure that your tool is a minimum of 50% charged.
PC: To set up the flash document, you want a PC or Laptop.
Backup: The very very first thing to concentrate on is taking the tool backup. You may no longer be capable to take the backup of telephone knowledge, then again, if in case you have inserted a reminiscence card for your tool, take away it a minimum of to put it aside.
Xiaomi Flash Tool: Download and Install the Xiaomi Mi Flash instrument in your PC (Fastboot Method)
Install Latest Driver: Install the Latest Xiaomi USB Drivers. [For All Android USB Drivers]
Download: Download the beneath given required recordsdata in your PC.
- Download the MIUI xxx Fastboot ROM to your Xiaomi gadgets
- Now flip your tool off utterly. Press the Volume– key and the Power button concurrently to go into Fastboot mode.
- Once you will have entered fastboot mode, you are going to see the Mi Bunny Fastboot mode image.
- Now attach the tool to the Windows PC/pc by way of a micro USB cable.
- You want to double click on at the downloaded ROM document to extract it.
- Open the extracted ROM folder, and duplicate its trail at the laptop.
- To set up Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash instrument in your laptop.
- Now click on at the installer document in your laptop and proceed the set up. (Ignore the protection caution) and make a selection run to proceed the set up.
- After set up is done, open MiFlash.exe and paste the cope with bar from the ROM document folder trail copied within the sixth step. (You too can browse the folder via tapping the Select button).
- If you will have pasted the Address code, Now Click at the first button (rotated out in yellow) to Refresh, and MiFlash must robotically acknowledge the tool. Then click on the second one button (rotated out in purple) to flash the ROM document to the tool.
- Your flashing procedure has began, Now Wait till the growth bar within MiFlash turns totally inexperienced, this means that the ROM has been effectively put in. Then your tool must robotically boot to the brand new model.
- First of all, To Install by way of Recovery, you want to obtain Recovery ROM
- Now attach your Xiaomi tool to PC and duplicate the downloaded document to the downloaded_rom folder for your Internal Storage.
- Launch ‘Updater‘ app for your tool.
- Click at the three dots (‘…’) on the top-right nook, and make a selection the ‘make a choice replace bundle‘.
now press OK to begin the flashing procedure.
- Done. Your tool will reboot after the flashing is finished.
Check Our Other put up On- Xiaomi Mi 6 Plus Official Stock Firmware File Download
Check Our Other put up On- Xiaomi Mi Mix Official Stock Firmware File Download
Check Our Other put up On- Xiaomi Mi Note 2 Stock Firmware File Download
Firmware File Download | Link Here |
•Warning: The Firmware document is just for the Xiaomi Redmi 4A , Don’t do that document on another tool, It might brick or harm your tool we will be able to no longer be liable for that.
•Important Suggestion: If your downside no longer solved via given answer you’ll write in feedback we will be able to check out absolute best to mend once we will be able to.