Xiaomi Redmi 4 Prime Stock Firmware Download
|Xiaomi Redmi 4 Prime|
|Display Technology||Display||IPS LCD capacitive touchscreen|
|Screen Resolution||1080×1920 pixels|
|Screen Size||5.0” inches|
|Operating System||Android 6.0.1|
|Dust and Waterproof||–|
|CPU/GPU||Processor Chipset||Snapdragon 425|
|Expandable Up to||256GB|
|Connectivity||Hybrid Dual SIM Nano-SIM, Bluetooth, 4G voLTE, GPS,|
|Dimensions||141.3 x 69.6 x 8.9 mm|
How To Install The Flash File Full Guide:-
Charge your instrument: Before you continue, you’re beneficial to make certain that your instrument is no less than 50% charged.
PC: To set up the flash document, you wish to have a PC or Laptop.
Backup: The very very first thing to be aware of is taking the instrument backup. You may now not have the ability to take the backup of telephone information, then again, when you’ve got inserted a reminiscence card for your instrument, take away it no less than to reserve it.
Xiaomi Flash Tool: Download and Install the Xiaomi Mi Flash device in your PC (Fastboot Method)
Install Latest Driver: Install the Latest Xiaomi USB Drivers. [For All Android USB Drivers]
Download: Download the underneath given required information in your PC.
- Download the MIUI xxx Fastboot ROM to your Xiaomi gadgets
- Now flip your instrument off totally. Press the Volume– key and the Power button concurrently to go into Fastboot mode.
- Once you will have entered fastboot mode, you are going to see the Mi Bunny Fastboot mode image.
- Now attach the instrument to the Windows PC/pc by way of a micro USB cable.
- You wish to double click on at the downloaded ROM document to extract it.
- Open the extracted ROM folder, and replica its trail at the laptop.
- To set up Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash device in your laptop.
- Now click on at the installer document in your laptop and proceed the set up. (Ignore the safety caution) and choose run to proceed the set up.
- After set up is finished, open MiFlash.exe and paste the cope with bar from the ROM document folder trail copied within the sixth step. (You too can browse the folder by way of tapping the Select button).
- If you will have pasted the Address code, Now Click at the first button (turned around out in yellow) to Refresh, and MiFlash must robotically acknowledge the instrument. Then click on the second one button (turned around out in purple) to flash the ROM document to the instrument.
- Your flashing procedure has began, Now Wait till the development bar within MiFlash turns absolutely inexperienced, this means that the ROM has been effectively put in. Then your instrument must robotically boot to the brand new model.
- First of all, To Install by way of Recovery, you wish to have to obtain Recovery ROM
- Now attach your Xiaomi instrument to PC and replica the downloaded document to the downloaded_rom folder for your Internal Storage.
- Launch ‘Updater‘ app for your instrument.
- Click at the three dots (‘…’) on the top-right nook, and choose the ‘select replace package deal‘.
now press OK to start out the flashing procedure.
- Done. Your instrument will reboot after the flashing is finished.
Check Our Other put up On- Xiaomi Mi Mix Official Stock Firmware File Download
Check Our Other put up On- Xiaomi Mi Note 2 Stock Firmware File Download
Check Our Other put up On- Xiaomi Mi 5s Plus Stock Firmware File Download
Firmware File Download | Link Here | Fastboot |
Firmware File Download | Link Here | Recovery |
•Warning: The Firmware document is just for the Xiaomi Redmi 4 Prime , Don’t do that document on some other instrument, It would possibly brick or harm your instrument we can now not be liable for that.
•Important Suggestion: If your downside now not solved by way of given resolution you’ll be able to write in feedback we can take a look at perfect to mend once we will.