Xiaomi Mi Pad 3 Official Stock Firmware Download
|Xiaomi Mi Pad 3|
|Display Technology||Display||IPS LCD capacitive touchscreen|
|Screen Resolution||1536×2048 pixels|
|Screen Size||7.9” inches|
|Operating System||Android Nougat|
|Dust and Waterproof||–|
|Expandable Up to||No|
|Connectivity||Bluetooth, 4G voLTE, GPS,|
|Dimensions||200.4 x 132.6 x 7 mm|
How To Install The Flash File Full Guide:-
Charge your tool: Before you continue, you’re beneficial to make sure that your tool is a minimum of 50% charged.
PC: To set up the flash record, you wish to have a PC or Laptop.
Backup: The very very first thing to concentrate on is taking the tool backup. You would possibly no longer have the ability to take the backup of telephone knowledge, alternatively, you probably have inserted a reminiscence card on your tool, take away it a minimum of to put it aside.
Xiaomi Flash Tool: Download and Install the Xiaomi Mi Flash instrument for your PC (Fastboot Method)
Install Latest Driver: Install the Latest Xiaomi USB Drivers. [For All Android USB Drivers]
Download: Download the under given required recordsdata for your PC.
- Download the MIUI xxx Fastboot ROM in your Xiaomi units
- Now flip your tool off totally. Press the Volume– key and the Power button concurrently to go into Fastboot mode.
- Once you’ve got entered fastboot mode, you’re going to see the Mi Bunny Fastboot mode image.
- Now attach the tool to the Windows PC/pc by means of a micro USB cable.
- You wish to double click on at the downloaded ROM record to extract it.
- Open the extracted ROM folder, and duplicate its trail at the laptop.
- To set up Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash instrument for your laptop.
- Now click on at the installer record for your laptop and proceed the set up. (Ignore the safety caution) and choose run to proceed the set up.
- After set up is finished, open MiFlash.exe and paste the cope with bar from the ROM record folder trail copied within the sixth step. (You too can browse the folder by way of tapping the Select button).
- If you’ve got pasted the Address code, Now Click at the first button (turned around out in yellow) to Refresh, and MiFlash must mechanically acknowledge the tool. Then click on the second one button (turned around out in crimson) to flash the ROM record to the tool.
- Your flashing procedure has began, Now Wait till the growth bar within MiFlash turns totally inexperienced, this means that the ROM has been effectively put in. Then your tool must mechanically boot to the brand new model.
- First of all, To Install by means of Recovery, you wish to have to obtain Recovery ROM
- Now attach your Xiaomi tool to PC and duplicate the downloaded record to the downloaded_rom folder on your Internal Storage.
- Launch ‘Updater‘ app on your tool.
- Click at the three dots (‘…’) on the top-right nook, and choose the ‘select replace package deal‘.
now press OK to start out the flashing procedure.
- Done. Your tool will reboot after the flashing is completed.
Check Our Other put up On- Xiaomi Redmi Note 4X Official Stock Firmware Download
Check Our Other put up On- Xiaomi Redmi Note 4 Official Stock Firmware Download
Check Our Other put up On- Xiaomi Redmi 4A Official Stock Firmware Download
Firmware File Download | Link Here |
•Warning: The Firmware record is just for the Xiaomi Mi Pad 3 , Don’t do this record on some other tool, It might brick or injury your tool we can no longer be chargeable for that.
•Important Suggestion: If your drawback no longer solved by way of given resolution you’ll be able to write in feedback we can take a look at best possible to mend once we will be able to.