Xiaomi Mi 6 Official Stock Firmware Download
|Xiaomi Mi 6|
|Display Technology||Display||IPS LCD capacitive touchscreen|
|Screen Resolution||1080×1920 pixels|
|Screen Size||5.15” inches|
|Operating System||Android Nougat|
|Dust and Waterproof||–|
|CPU/GPU||Processor Chipset||Snapdragon 835|
|Expandable Up to||No|
|Connectivity||Dual SIM(Nano-SIM), Bluetooth, 4G voLTE, GPS,|
|Dimensions||145.2 x 70.5 x 7.5 mm|
How To Install The Flash File Full Guide:-
Charge your software: Before you continue, you’re beneficial to make certain that your software is a minimum of 50% charged.
PC: To set up the flash record, you wish to have a PC or Laptop.
Backup: The very very first thing to be aware of is taking the software backup. You may now not be capable of take the backup of telephone information, then again, when you have inserted a reminiscence card on your software, take away it a minimum of to reserve it.
Xiaomi Flash Tool: Download and Install the Xiaomi Mi Flash device to your PC (Fastboot Method)
Install Latest Driver: Install the Latest Xiaomi USB Drivers. [For All Android USB Drivers]
Download: Download the beneath given required recordsdata to your PC.
- Download the MIUI xxx Fastboot ROM on your Xiaomi gadgets
- Now flip your software off utterly. Press the Volume– key and the Power button concurrently to go into Fastboot mode.
- Once you’ve gotten entered fastboot mode, you are going to see the Mi Bunny Fastboot mode image.
- Now attach the software to the Windows PC/computer by the use of a micro USB cable.
- You want to double click on at the downloaded ROM record to extract it.
- Open the extracted ROM folder, and duplicate its trail at the laptop.
- To set up Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash device to your laptop.
- Now click on at the installer record to your laptop and proceed the set up. (Ignore the protection caution) and choose run to proceed the set up.
- After set up is done, open MiFlash.exe and paste the cope with bar from the ROM record folder trail copied within the sixth step. (You too can browse the folder through tapping the Select button).
- If you’ve gotten pasted the Address code, Now Click at the first button (turned around out in yellow) to Refresh, and MiFlash must robotically acknowledge the software. Then click on the second one button (turned around out in pink) to flash the ROM record to the software.
- Your flashing procedure has began, Now Wait till the growth bar inside of MiFlash turns totally inexperienced, which means that the ROM has been effectively put in. Then your software must robotically boot to the brand new model.
- First of all, To Install by the use of Recovery, you wish to have to obtain Recovery ROM
- Now attach your Xiaomi software to PC and duplicate the downloaded record to the downloaded_rom folder on your Internal Storage.
- Launch ‘Updater‘ app on your software.
- Click at the three dots (‘…’) on the top-right nook, and choose the ‘make a selection replace package deal‘.
now press OK to start out the flashing procedure.
- Done. Your software will reboot after the flashing is completed.
Check Our Other publish On- Xiaomi Mi 5c Official Stock Firmware File Download
Check Our Other publish On- Xiaomi Redmi Note 4X Official Stock Firmware Download
Check Our Other publish On- Xiaomi Redmi Note 4 Official Stock Firmware Download
Firmware File Download | Link Here |
•Warning: The Firmware record is just for the Xiaomi Mi 6, Don’t do this record on another software, It might brick or harm your software we can now not be liable for that.
•Important Suggestion: If your drawback now not solved through given answer you’ll write in feedback we can take a look at best possible to mend once we will be able to.