Xiaomi Mi 5c Official Stock Firmware File Download
|Xiaomi Mi 5c|
|Display Technology||Display||IPS LCD capacitive touchscreen|
|Screen Resolution||1080×1920 pixels|
|Screen Size||5.15” inches|
|Operating System||Android 7.1|
|Dust and Waterproof||–|
|CPU/GPU||Processor Chipset||Xiaomi Surge S1|
|Expandable Up to||No|
|Connectivity||Dual SIM Nano-SIM, Bluetooth, 4G voLTE, GPS,|
|Dimensions||144.4 x 69.7 x 7.1 mm|
How To Install The Flash File Full Guide:-
Charge your software: Before you continue, you’re advisable to be sure that your software is no less than 50% charged.
PC: To set up the flash document, you wish to have a PC or Laptop.
Backup: The very very first thing to be aware of is taking the software backup. You may no longer be capable to take the backup of telephone information, on the other hand, when you’ve got inserted a reminiscence card on your software, take away it no less than to put it aside.
Xiaomi Flash Tool: Download and Install the Xiaomi Mi Flash software for your PC (Fastboot Method)
Install Latest Driver: Install the Latest Xiaomi USB Drivers. [For All Android USB Drivers]
Download: Download the underneath given required information for your PC.
- Download the MIUI xxx Fastboot ROM in your Xiaomi units
- Now flip your software off totally. Press the Volume– key and the Power button concurrently to go into Fastboot mode.
- Once you may have entered fastboot mode, you are going to see the Mi Bunny Fastboot mode image.
- Now attach the software to the Windows PC/pc by means of a micro USB cable.
- You wish to double click on at the downloaded ROM document to extract it.
- Open the extracted ROM folder, and duplicate its trail at the laptop.
- To set up Mi Flash Tool, Download Mi Flash Tool Zip and Extract the MIUI MI Flash software for your laptop.
- Now click on at the installer document for your laptop and proceed the set up. (Ignore the protection caution) and make a selection run to proceed the set up.
- After set up is finished, open MiFlash.exe and paste the cope with bar from the ROM document folder trail copied within the sixth step. (You too can browse the folder via tapping the Select button).
- If you may have pasted the Address code, Now Click at the first button (rotated out in yellow) to Refresh, and MiFlash will have to robotically acknowledge the software. Then click on the second one button (rotated out in pink) to flash the ROM document to the software.
- Your flashing procedure has began, Now Wait till the development bar inside of MiFlash turns totally inexperienced, this means that the ROM has been effectively put in. Then your software will have to robotically boot to the brand new model.
- First of all, To Install by means of Recovery, you wish to have to obtain Recovery ROM
- Now attach your Xiaomi software to PC and duplicate the downloaded document to the downloaded_rom folder on your Internal Storage.
- Launch ‘Updater‘ app on your software.
- Click at the three dots (‘…’) on the top-right nook, and make a selection the ‘make a choice replace bundle‘.
now press OK to start out the flashing procedure.
- Done. Your software will reboot after the flashing is completed.
Check Our Other publish On- Xiaomi Redmi Note 4 Official Stock Firmware Download
Check Our Other publish On- Xiaomi Redmi 4A Official Stock Firmware Download
Check Our Other publish On- Xiaomi Redmi 4 Prime Stock Firmware Download
Firmware File Download | Link Here |
•Warning: The Firmware document is just for the Xiaomi Mi 5c , Don’t do that document on every other software, It would possibly brick or harm your software we can no longer be liable for that.
•Important Suggestion: If your downside no longer solved via given answer you’ll write in feedback we can check out best possible to mend once we will be able to.